Maximum Height : 1500 mm
Maximum Width : 5000 mm
Maximum Length : 12000 mm
Blast Wheels : 12
Blast Wheel Power : 18.5 kW
Power Required : 300 kW
Passline Height : 520mm
Conveyor Speed : 0.5 to 5 m/min
Dust Collector Size : 16000 CFM
Floor Space Required : 10m x 40m
Maximum Height : 8.5m
Initial Fill of Abrasive : 16000 kgs
Estimated Abrasive Consumption
68 kgs per blasting hour
Estimated Production SA 2.5
400 - 500 m sq. per hour
Estimated Line Speed SA 2.5
0.8 linear m / min
Production data assumes condition “B” steel and is
dependent on the material
|Twelve Wheel Shot Blasting Machine
Model - 12W - 5.0 x 1.5
The SPT 12W - 5.0 x 1.5 is a heavy duty shot blasting machine built for large plate fabrications.
The machine has a unique design to ensure that the bottom blast wheels are all positioned at the same distance from the work piece to give maximum
efficiency. All the blast wheels are angled to give positive cleaning on the end faces. As standard the machine is supplied with roller conveyors with a
1000kgs/m capacity and if required we can supply conveyors for up to 5000kgs/m.
To optimize efficiency the top and bottom blast wheels can be blast independently if required.
|This machine is designed specifically for very
heavy steel plate fabrications.
The twelve blast wheels are directly driven by a
cast iron 18.5 kW motor. As an option a 30kW
motor that will increase the line speed. The blast
cabinet is fully lined with 10mm thick
manganese steel with the addition of an extra
12mm thick Inline Liner directly opposite each
blast wheel. In addition we also line the first
300mm of the vestibules with manganese.
All the blast wheel parts are made from 25%
The machine pictured here was fabricated in
Thailand in conjunction with Vatana Phaisal
Engineering and we are very proud of this.
If you would like more information on this
blaster then please email us or use our
Copyright Steelex International Ltd All rights reserved.
For India :
For Thailand :